|
|
Formula Student Front Wheel Carrier Design
Černý, Filip ; Porteš, Petr (referee) ; Ramík, Pavel (advisor)
This thesis deals with the design of the front wheel hub and upright of Formula student car. First component is a short search on Formula Student event and comparing diverse structures of upright for use in both racing and road cars. It also includes design of hub and upright in the CAD program and computational model of the upright created in FEM program specifically for stress analysis in selected conditions. It also includes optimization of the overall proposal.
|
|
|
Retractible landing gear design for Z 143 LSi airplane
Gregor, Jiří ; Vaněk, František (referee) ; Píštěk, Antonín (advisor)
The diploma thesis deals with the design of the replacement the Z 143 LSi landing gear with the new VUT 100 type landing gear in a retractable system. The first part of this thesis is devoted to the description of the Z 143 LSi aircraft and its landing gear and the description of the retractable landing gear type VUT 100. The next part describes the possible variants of the installation the VUT 100 landing gear, which are critically evaluated. Then there is selected the final variant for the installation, which is designed in Catia V5 software. The final design includes remotorization with Lycoming IO-390 and new design of engine bed. For the proposed solution, a new mass analysis with the calculation of centrations, new cases of ground load, a new flight envelope of load and additional cases of load of a new engine bed are prepared. The proposed engine bed is analyzed by the finite element calculation method in the MS Patran software. Finally, a possible scheme of the chassis retraction system is proposed.
|
|
|
Engineering design of the vehicle suspension rocker
Poláček, Vojtěch ; Ramík, Pavel (referee) ; Bradávka, Marek (advisor)
Diploma thesis deals with the design and stress analysis of the rocker suspension for an autocross car. The research describes some real cases of using suspension with pushrod and rocker in motorsport. Subsequently, the work deals with the design of the wheel bump/rebound limiting stops and bump/rebound measuring. The challenge is to design a component shape, size and select fit of a rocker with an emphasis on low weight whilst maintaining sufficient strength and rigidity. The design study include stress analysis which leads to optimize the final shape.
|
|
|
Tubesheet analysis according standards and FEM
Horniak, Patrik ; Vincour, Dušan (referee) ; Pernica, Marek (advisor)
The focus of this master’s thesis is strength design of tube sheet, which is part of shell and tube heat exchanger, with fixed tube sheets. This tube sheet is integrated with both shell and channel of the heat exchanger. First part of the thesis is focused on literature review of shell and tube heat exchangers, tube sheets and calculation standards, which are used for their strength design. The strength design of tube sheet is presented in second part of the thesis, according to the standards: ČSN EN 13445, ASME BPVC VIII and TEMA, along with comparison of these standards. Last section of the thesis deals with the implementation of FEM analysis and its comparison to the analytic approach of strength design, used in accordance to the standards mentioned above.
|
|
|
Renovation of escalator
Kobzík, Martin ; Šebesta, Luděk (referee) ; Pokorný, Přemysl (advisor)
This master's thesis covers the construction analysis of an escalator by the Otis a.s. company and the conception of its modernization called "In-truss".This type of modernization consists in preserving the supporting construction of the 506-type escalator into which the components of newer 506-NCE series are to be built in. Such operation requires modifying the construction and creating adaptors used to anchor the new components to it. These modifications lead to the stress testing of the construction, that is done by using the finite elements method in NX-Ideas software. The thesis contains the design of selected subsystems of the escalator, the stress testing of the new supporting construction and the creation of volume model in CREO-Parametric application for further use.
|
|
|
Stress-strain analysis of artery with atheroma
Janík, Rostislav ; Fuis, Vladimír (referee) ; Burša, Jiří (advisor)
This master thesis analyses stress and strain of iliac artery with atheroma. Model of artery is created as 3D and symmetric in the longitudinal cut. The first part of the thesis deals with a research, which includes obtaining information from medicine, which is necessary fort the right solution of the task. Next part dedicates to nonlinear mechanics, constitutive modeling from the view of biomechanice and computational modeling of arteries. In the next part is made analysis for load on artery by increased blood pressure. In the end were specified uncertainties of the used model and evaluated chance of atherosclerotic plaque rupture.
|
|
|
Stress strain analysis of the femur based on the CT data collection
Nečas, David ; Marcián, Petr (referee) ; Vosynek, Petr (advisor)
The area of clinical biomechanics is a rapidly growing engineering discipline in the world of today. This master's thesis is concerned with the stress-strain analysis of human femoral neck. In the first place it emphasizes the creation of computational model, especially the model of bone material, because of its high level of inhomogeneity. The creation of the computational model has been tested using several software packages, which are often mentioned in connection with the biomechanical tasks. The latter part of the thesis contains finite element method analysis for several material models, which are based on extensive analysis of relations used to transfer the information from computed tomography data to material model properties. Subsequently, the realization of experimental measurement is described. The final part of the thesis contains evaluated results obtained from the FEM analysis, which are also compared with the experiment.
|
|
|
Design of heat exchanger after ČSN EN 13 445
Lošák, Pavel ; Vincour, Dušan (referee) ; Vincour, Dušan (referee) ; Nekvasil, Richard (advisor)
Diploma thesis is fucused on strength calculation of the heat exchanger according to ČSN EN 13 445. Introductory part introduce problems with the design of heat exchangers. In other parts there are a strength calculation of the heat exchanger according to ČSN EN 13 445, the results of the analysis with their appreciation. Annexes included output logs from the program Sant 'Ambrogio, and drawings documentation.
|
|
| |
|
|
Influence of residual stress on pressure vessel part fatigue life
Boleloucký, Václav ; Vincour, Dušan (referee) ; Létal, Tomáš (advisor)
This bachelor’s thesis deals with the impact of a residual stress, caused by an applied cyclic pressure, on fatigue life of a pressure vessel part (flat end–cylinder connection). Bachelor’s thesis includes the design of the pressure vessel according to CSN EN 13 445 regulations, analytical solution in Maple software, from which stresses and deformations are determined. Then the results of the analytical approach are firstly verified by a FEM modelling in ANSYS Workbench software and secondly compared to each other in graphs and discussed. From the values of stresses in FEM, analysis fatigue life expectations are calculated with the respect to CSN EN 13 445 regulations, for two cases. First one, where a pressure test is applied and second one, where the pressure test is not applied before the pressure vessel is put into service. In the conlusion the obtained results are discussed.
|
guest ::
